H630(#50)
| Spindle model | rpm | 6,000 | 4,000 (OP) | 8,000 (OP) |
| Front bearings size | mm | Ø 100 mm | Ø 100 mm | Ø 100 mm |
| Taper size | ISO-50 / HSK-A100 | ISO-50 / HSK-A100 | ISO-50 / HSK-A100 | |
| Static clamping force | kgw | 2000 / 4500 | 2000 / 4500 | 2000 / 4500 |
| AC servomotor | α15 or α18 | α15 or α18 | α15 or α18 | |
| AC servomotor | kw | 15 or 18.5 | 15 or 18.5 | 15 or 18.5 |
| Spindle Lubrication | Grease | Grease | Grease | |
| Gear Box Lubrication | ISO 32 hydraulic oil | ISO 32 hydraulic oil | ISO 32 hydraulic oil | |
| Spindle Speed |
2 Steps
|
2 Steps
|
2 Steps
|
|
| Gear output speed | Type | Standard | OP | OP |
| High | 0.87 | 1 | 1 | |
| Low | 0.22 | 0.25 | 0.25 | |
| Gear limited switch | 2 Pcs | TZ-7312 | TZ-7312 | TZ-7312 |
| Pneumatic shift pressure | bar | 3~4 bar | 3~4 bar | 3~4 bar |
| Spindle shaft positioning | 1 Pcs | PNP_NO | PNP_NO | PNP_NO |
| Spindle unclamping cylinder sensors | 2 Pcs | PNP_NO | PNP_NO | PNP_NO |
| Spindle unclamping cylinder oil pressure | 55~60 bar | 55~60 bar | 55~60 bar | |
| Spindle external coolant | Standard | Standard | Standard | |
| Coolant through system (M16*P1.5LH) | Standard | Standard | Standard | |
| Dimensions (W*H*L) | mm | 320 * 595 * 925 | 320 * 595 * 925 | 320 * 595 * 925 |
| Approx. weight | kg | 415 | 415 | 415 |